Semi-Truck Weight Limits: Gross, Axle, and Bridge Rules
Learn why total weight, axle distribution, bridge formula, permits, and state routes all matter to a legal load.
A truck can be under a headline gross-weight limit and still be overweight on an axle group or a particular route. Legal planning requires the loaded tractor-trailer weight, axle distribution, bridge formula, and the rules for every road on the route.
Federal Interstate baseline
FHWA describes the usual Interstate limits as 80,000 pounds gross, 20,000 pounds on a single axle, and 34,000 pounds on a tandem axle, subject to the federal bridge formula and applicable exceptions or grandfather rights. Those figures do not replace checking the exact configuration and route.
State and local roads may have different limits, and posted bridges can be more restrictive. Oversize or overweight moves may require a permit and a specified route.
Weigh the actual combination
Use a certified scale when necessary and check steer, drive, and trailer axle groups separately. Fuel, equipment, driver belongings, and cargo placement all affect the result. The trailer's rated capacity is not the same as the legal payload remaining for a particular truck.
If the load is close to a limit, plan how it will be positioned and reweigh after adjustment. Do not assume a shipping document's declared weight is the final scale weight.
Make dispatch part of the check
Before booking heavy freight, confirm commodity weight, pallet or piece distribution, pickup scale availability, and route restrictions. If a permit is required, obtain it before travel and follow its conditions. Keep scale tickets and permit documents with the load file.
Frequently asked questions
Is 80,000 pounds always legal on an Interstate?
No. The bridge formula, axle limits, configuration, and any route-specific restrictions can lower the permitted weight.
Sources and further reading
Published October 28, 2026
