Flatbed Truck Licensing: Match the License to the Vehicle
Understand why CDL class depends on vehicle ratings and operation, while flatbed cargo creates separate securement duties.
There is no single 'flatbed license' for every flatbed truck. The required driver license depends on the vehicle or combination weight rating, passenger or hazardous-material use, and state rules. The freight and trailer type also create securement and permit responsibilities.
Check the vehicle first
Identify the truck's GVWR and any combination's GCWR, along with the trailer's rating. FMCSA's CDL categories use weight thresholds and operating characteristics; a small flatbed vehicle and a tractor-trailer do not automatically require the same license.
Confirm any endorsements or restrictions relevant to the actual cargo. State licensing agencies issue CDLs and can explain local requirements.
License and securement are separate
A properly licensed driver still needs to secure the load correctly. Flatbed freight may require chains, straps, edge protection, tarps, and commodity-specific methods. Check dimensions and weight distribution before travel.
Oversize or overweight cargo may require state permits and an approved route. A CDL does not substitute for those permits.
Build a qualification checklist
Before accepting flatbed work, verify license class, medical qualification where required, insurance, equipment capacity, securement gear, training, and any permits. A dispatcher should receive the truck's actual specifications rather than making assumptions from the word flatbed.
Frequently asked questions
Do all flatbed drivers need a Class A CDL?
No. The required class depends on the vehicle or combination and other rules. Many tractor-trailer flatbed operations do require Class A, but a small flatbed truck can differ.
Sources and further reading
Published October 28, 2026
