Dispatch & Freight//Dilawar Jahangir

Detention Pay in Trucking: What to Confirm and How to Document a Delay

A practical detention-pay workflow for owner-operators and dispatchers: confirm the terms, record the wait, send timely updates, and submit a clear request.

The truck is at the receiver, the appointment has passed, and there is still no dock assignment. Before the wait turns into an argument about payment, your team needs a shared record of what happened—and the terms that apply to that load.

Detention requests are easier to explain when the agreement, timeline, and supporting documents tell the same story. This guide follows that process from booking through invoicing. It is an operational checklist for carriers, not legal advice or a promise that every delay will qualify for payment.

A long wait and payable detention are not the same thing

Dwell time describes time spent at a facility. A detention-payment request asks for compensation under the terms applicable to the load. Recording a long stop establishes part of the timeline; it does not, by itself, establish the amount owed.

FMCSA's February 2024 research notice explains that there is no standard detention definition, although studies have used facility dwell exceeding two hours. That research benchmark is not a universal payment rule. Read the agreement for the actual move.

This article concerns an accessorial paid to a carrier. An employee driver's compensation is a separate question involving the employment arrangement and applicable law. Do not assume that a carrier's detention receipt automatically determines the driver's wages.

Confirm the detention terms before accepting the load

Ask where the detention conditions are written: the rate confirmation, broker–carrier agreement, or an applicable accessorial policy. If a phone conversation differs from the paperwork, request written clarification before acceptance rather than relying on a promise to sort it out later.

Free time can differ by service. For example, Mothership's published policy lists 30 minutes for its specified box- and straight-truck services and 60 minutes for a 53-foot dry van. Those are that provider's terms, not a recommendation or industry-wide allowance.

  • Clock start: appointment time, completed check-in, or another defined event?
  • Free time: how much is included, and what conditions affect eligibility?
  • Payment: hourly rate, billing increments, maximum amount, and exclusions?
  • Notice: whom must you contact, through which channel, and by when?
  • Evidence: signed in/out times, tracking, receipts, or other required records?
  • Submission: deadline, approval process, and where the request must go?

Build the timeline when the driver arrives

Record the appointment, local time zone, gate arrival, and completed check-in separately. A driver arriving early may spend longer on site than the payment clock recognizes. Distinguishing those events avoids a preventable disagreement about when the wait began.

Keep the load reference, facility name, check-in number, dock assignment, and the driver's updates together. Save gate tickets or permitted tracking records. Obtain legible arrival and departure entries on the shipping documents where required. If facility staff decline to sign, record that fact and ask the broker promptly what alternative evidence it will accept; do not invent a signature or alter the times.

Send a useful update while the delay is happening

Follow the notice procedure for that load. Tell the broker what is happening while it can still contact the facility, not only after the driver leaves. Save the sent message and any response. An acknowledgment that the driver is waiting is useful, but it is not necessarily approval of the charge.

A reusable message can be simple: Load [reference], [facility], [date and time zone]. Appointment [time]; checked in [time]. Current status: [waiting for dock/loading/unloading/paperwork]. The agreed free-time period ends at [time]. Please confirm receipt and advise on the delay and detention-request procedure.

Update the carrier's next appointment and availability if the wait changes the plan. Keep safety and applicable hours-of-service requirements separate from the payment discussion. A potential accessorial payment is not a reason to accept an unsafe or unlawful schedule.

Calculate the request from the agreed clock

Here is a hypothetical example, not a market rate or a statement of what any broker owes. Assume the written terms start the clock at the 9:00 a.m. appointment, allow two free hours, pay $60 per hour in 15-minute increments, and end the clock at documented release. The truck checks in at 8:40 a.m. and is released at 1:30 p.m. the same day.

Under those assumptions, the measured period is 4.5 hours, from 9:00 a.m. to 1:30 p.m. Subtracting two free hours leaves 2.5 potentially billable hours. The request is 2.5 × $60 = $150, assuming all eligibility and notice conditions are met and no cap applies. The early-arrival minutes are excluded because this example starts at the appointment.

A different clock-start rule, release event, rounding method, or cap changes the result. Show your calculation rather than sending only a total. Keep requested, approved, invoiced, and received amounts separate in your records.

Submit one complete request before the deadline

A deadline can be much sooner than the usual invoice cycle. As a broker-specific example, section 4(f) of Uber Freight's published carrier agreement requires accessorial requests and receipts within 24 hours of delivery, supported by a signed bill of lading with legible arrival and departure times. Check the current agreement for your load; that is not a deadline for every broker.

Assemble the documents before handing the load file to billing. Identify the stop, explain the delay briefly, reference the agreed terms, and include the calculation. Submit through the specified channel and save confirmation. If approval changes the agreed total, retain the revised rate confirmation or other written authorization alongside the original.

  • Load number, carrier name, facility, appointment, and time zone.
  • Applicable written detention terms and any required approval.
  • Arrival, check-in, and release records with required facility signatures.
  • Timely notices, responses, and supporting tracking or receipts where applicable.
  • Free-time deduction, billable period, rate, increments, cap, and amount requested.
  • Submission timestamp, recipient or portal reference, and follow-up owner.

If the request is declined, ask for the specific reason

Ask which term or piece of evidence is in dispute. The issue might be the start time, eligibility, missing signature, notice channel, or amount calculated. Respond to that point with the original records. If a document is missing, ask whether an alternative is acceptable rather than assuming a screenshot replaces it.

Keep the conversation factual and use the agreed escalation process. Do not change delivery instructions or withhold freight as a collection tactic. If the disagreement cannot be resolved, obtain advice appropriate to the contract and circumstances. A clear file supports that review; it does not guarantee recovery.

Give the driver, dispatcher, and billing team clear jobs

Decide the handoff before the first stop. The driver records events and obtains available paperwork. The dispatcher follows the communication procedure and updates the operating plan. Billing checks the deadline, calculation, approval status, and final submission. In a one-truck business, one person may perform every role; the checklist still helps prevent a missed step.

After settlement, review the stop's actual time and compensation. Keep an internal facility history to inform future appointments, rate discussions, and lane choices. Treat pending detention as uncertain revenue when planning cash flow. The goal is not simply a larger invoice—it is fewer surprises between the load offer and the final payment.

Frequently asked questions

Does detention pay always start after two hours?

No. Two hours appears in industry research, but a load's payment conditions may use a different allowance or starting event. Confirm the applicable written terms before booking.

Does early arrival count toward detention?

Not necessarily. Record arrival and check-in, but use the clock-start rule for the actual load. The example in this guide starts at the appointment, not the early arrival.

Is GPS tracking enough to support a detention request?

It may support the timeline, but it may not satisfy every documentation requirement. Check whether signed shipping documents or other evidence are required, and confirm acceptable alternatives when a signature is unavailable.

Is there a standard detention rate?

Do not treat a quoted rate as universal. Confirm the rate, billing increments, free time, eligibility, and any cap for the load. The $60 rate in the worked example is hypothetical.

Does submitting a detention request guarantee payment?

No. The request still needs to satisfy the applicable terms and any approval process. Keep the requested amount distinct from the amount approved or received.

Sources and further reading

Published October 30, 2026

Keep reading

Related articles

Ready to Move?

Need help planning your next load?

Tell us about your equipment and lanes, and we can discuss dispatch support that fits your operation.